Two-Bottle rear mount hydration system clamps to standard round diameter bicycle seat posts (31.6mm or 27.2mm). Affix two CO2 cartridges with included brackets. New reinforced design Includes 2 lightweight Profile Design Kages Includes CO2 mounting brackets Fits 31.6mm to 27.2mm seatposts (shim included) Construction: 6061-T6 Forged Aluminum Color: Matte Black Weight: 171g Capacity: 1 or 2 Kages compatible Weight: 228g.
Profile Design RMP2 comes with 2 Vise Kages and can be changed to a single bottle carrier. Rear mount hydration system mounts to standard 7mm saddle rails and sits flush to rear of saddle. Featuring an innovative elliptical arch clamp for tilt adjustability. Carries 1 or 2 water bottle. Precision machined and stamped 6061-T6 aluminum 14 degrees of tilt adjustment Comes with 2 Vise Kages 200G For standard bottle use only..
BLACKBURN’S LIGHTEST CAGE EVER An elegant and sleek design that has a firm grip to keep your bottles cinched down.Features: UD Carbon Fiber – Uni-Directional carbon fiber material allows for maximum strength, and minimal material for ultimate weight savings Bottle Retention – There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike.Details: Black Matte is the lightest color/finish combination. Weight may vary up to 3 grams between other colors/finishes. Two mounting bolts included.Dimensions: Length 140mm/5.51in Width 78mm/3.07in Height 78mm/3.07inWeight: 16g/0.04lbs.
The rebirth of our successful Camber Cage. Built tough to withstand MTB abuse, yet elegant enough to pop on your road bike. Our Camber cage pulls double duty, and looks good doing it. Updated carbon layup from 3K weave to UD finish UD layup provides a smooth finish that reflects current carbon frame designs Rib cage retention design hugs your bottle securely Flared top opening assists aligning your bottle to the cage while on the fly 30 grams.
Quite often Triathlon framesets have smaller frame triangles and shorter head tubes in an effort to make the frames more aerodynamic. This results in having to pull the water bottle somewhat sideways in order to get it out of the bottle cage. Most current cages on the market make bottle extraction difficult. The engineers at XLAB have a cage that grips very well over bumpy surfaces but also has a special cut off angle of 30 degrees which testing has proved is the optimum angle in Tri framesets. It is super quick to get the bottle out of the cage. The cage features stiff bottom lip to support large bottles, stiff upper tab to retain bottles in the cage and slots in the back to provide vertical adjustment on the frame. Made with the same high temperature and pressure process as the successful Gorilla rear cage and in extra stiff carbon. The 6 arm design and graphics match the Gorilla so you can now have a consistent bottle cage design on your racing machine but with cages designed for each specific purpose.
